Fridge circulation fan

My Danby all-fridge was freezing food on the lower shelf while the rest of the cabinet stayed at a normal temperature. The drain was clear, and the fridge appeared to be operating normally, so the problem was not obvious from a standard check.

I used a thermal camera to look at what was actually happening inside the cabinet. The images showed cold air pooling near the lower back of the fridge. The unit relied mostly on natural convection rather than a built-in circulation fan, so the coldest air was not mixing evenly through the cabinet.

The fix was a small targeted airflow improvement rather than a major appliance modification. I added a low-voltage fan on a custom 3D-printed bracket to gently circulate air through the cabinet. I also added a small thermal switch attached to the compressor so the fan only runs when the fridge is actively cooling.

The result was a more even temperature distribution and a practical fix for a frustrating problem. It is a small project, but it shows a useful pattern: diagnose the actual system behaviour, avoid unnecessary complexity, and make a targeted physical improvement that matches the real failure mode.

And now I have no excuse not to eat my vegetables.